Applying security patches in a timely manner and upgrading
to a newer release of an operating system are important aspects
of ongoing system administration. FreeBSD includes a utility
called freebsd-update which can be used to
perform both these tasks.
This utility supports binary security and errata updates to
FreeBSD, without the need to manually compile and install the patch
or a new kernel. Binary updates are available for all
architectures and releases currently supported by the security
team. The list of supported releases and their estimated
end-of-life dates are listed at https://www.FreeBSD.org/security/.
This utility also supports operating system upgrades to
minor point releases as well as upgrades to another release
branch. Before upgrading to a new release, review its release
announcement as it contains important information pertinent to
the release. Release announcements are available from https://www.FreeBSD.org/releases/.
If a crontab utilizing the features of
freebsd-update(8) exists, it must be disabled before
upgrading the operating system.
This section describes the configuration file used by
freebsd-update, demonstrates how to apply a
security patch and how to upgrade to a minor or major operating
system release, and discusses some of the considerations when
upgrading the operating system.
The default configuration file for
freebsd-update works as-is. Some users may
wish to tweak the default configuration in
/etc/freebsd-update.conf, allowing
better control of the process. The comments in this file
explain the available options, but the following may require a
bit more explanation:
# Components of the base system which should be kept updated. Components world kernel
This parameter controls which parts of FreeBSD will be kept
up-to-date. The default is to update the entire base system
and the kernel. Individual components can instead be
specified, such as src/base or
src/sys. However, the best option is to
leave this at the default as changing it to include specific
items requires every needed item to be listed. Over time,
this could have disastrous consequences as source code and
binaries may become out of sync.
# Paths which start with anything matching an entry in an IgnorePaths # statement will be ignored. IgnorePaths /boot/kernel/linker.hints
To leave specified directories, such as
/bin or /sbin,
untouched during the update process, add their paths to this
statement. This option may be used to prevent
freebsd-update from overwriting local
modifications.
# Paths which start with anything matching an entry in an UpdateIfUnmodified # statement will only be updated if the contents of the file have not been # modified by the user (unless changes are merged; see below). UpdateIfUnmodified /etc/ /var/ /root/ /.cshrc /.profile
This option will only update unmodified configuration
files in the specified directories. Any changes made by the
user will prevent the automatic updating of these files.
There is another option,
KeepModifiedMetadata, which will instruct
freebsd-update to save the changes during
the merge.
# When upgrading to a new FreeBSD release, files which match MergeChanges # will have any local changes merged into the version from the new release. MergeChanges /etc/ /var/named/etc/ /boot/device.hints
List of directories with configuration files that
freebsd-update should attempt to merge.
The file merge process is a series of diff(1) patches
similar to mergemaster(8), but with fewer options.
Merges are either accepted, open an editor, or cause
freebsd-update to abort. When in doubt,
backup /etc and just accept the merges.
See mergemaster(8) for more information about
mergemaster.
# Directory in which to store downloaded updates and temporary # files used by FreeBSD Update. # WorkDir /var/db/freebsd-update
This directory is where all patches and temporary files are placed. In cases where the user is doing a version upgrade, this location should have at least a gigabyte of disk space available.
# When upgrading between releases, should the list of Components be # read strictly (StrictComponents yes) or merely as a list of components # which *might* be installed of which FreeBSD Update should figure out # which actually are installed and upgrade those (StrictComponents no)? # StrictComponents no
When this option is set to yes,
freebsd-update will assume that the
Components list is complete and will not
attempt to make changes outside of the list. Effectively,
freebsd-update will attempt to update
every file which belongs to the Components
list.
The process of applying FreeBSD security patches has been
simplified, allowing an administrator to keep a system fully
patched using freebsd-update. More
information about FreeBSD security advisories can be found in
Section 14.11, “FreeBSD Security Advisories”.
FreeBSD security patches may be downloaded and installed using the following commands. The first command will determine if any outstanding patches are available, and if so, will list the files that will be modifed if the patches are applied. The second command will apply the patches.
#freebsd-update fetch#freebsd-update install
If the update applies any kernel patches, the system will need a reboot in order to boot into the patched kernel. If the patch was applied to any running binaries, the affected applications should be restarted so that the patched version of the binary is used.
Usually, the user needs to be prepared to reboot the
system. To know if a reboot is required by a kernel update,
execute the commands freebsd-version -k
and uname -r and if it differs a reboot
is required.
The system can be configured to automatically check for
updates once every day by adding this entry to
/etc/crontab:
@daily root freebsd-update cron
If patches exist, they will automatically be downloaded
but will not be applied. The root user will be sent an
email so that the patches may be reviewed and manually
installed with
freebsd-update install.
If anything goes wrong, freebsd-update
has the ability to roll back the last set of changes with the
following command:
#freebsd-update rollbackUninstalling updates... done.
Again, the system should be restarted if the kernel or any kernel modules were modified and any affected binaries should be restarted.
Only the GENERIC kernel can be
automatically updated by freebsd-update.
If a custom kernel is installed, it will have to be rebuilt
and reinstalled after freebsd-update
finishes installing the updates. The default kernel name
is GENERIC. The uname(1) command
may be used to verify its installation.
Always keep a copy of the GENERIC
kernel in /boot/GENERIC. It will be
helpful in diagnosing a variety of problems and in
performing version upgrades. Refer to Section 24.2.3.1, “Custom Kernels with FreeBSD 9.X and Later” for
instructions on how to get a copy of the
GENERIC kernel.
Unless the default configuration in
/etc/freebsd-update.conf has been
changed, freebsd-update will install the
updated kernel sources along with the rest of the updates.
Rebuilding and reinstalling a new custom kernel can then be
performed in the usual way.
The updates distributed by
freebsd-update do not always involve the
kernel. It is not necessary to rebuild a custom kernel if the
kernel sources have not been modified by
freebsd-update install. However,
freebsd-update will always update
/usr/src/sys/conf/newvers.sh. The
current patch level, as indicated by the -p
number reported by uname -r, is obtained
from this file. Rebuilding a custom kernel, even if nothing
else changed, allows uname to accurately
report the current patch level of the system. This is
particularly helpful when maintaining multiple systems, as it
allows for a quick assessment of the updates installed in each
one.
Upgrades from one minor version of FreeBSD to another, like
from FreeBSD 9.0 to FreeBSD 9.1, are called
minor version upgrades.
Major version upgrades occur when FreeBSD
is upgraded from one major version to another, like from
FreeBSD 9.X to FreeBSD 10.X. Both types of upgrades can
be performed by providing freebsd-update
with a release version target.
If the system is running a custom kernel, make sure that
a copy of the GENERIC kernel exists in
/boot/GENERIC before starting the
upgrade. Refer to Section 24.2.3.1, “Custom Kernels with FreeBSD 9.X and Later” for
instructions on how to get a copy of the
GENERIC kernel.
The following command, when run on a FreeBSD 9.0 system, will upgrade it to FreeBSD 9.1:
#freebsd-update -r 9.1-RELEASE upgrade
After the command has been received,
freebsd-update will evaluate the
configuration file and current system in an attempt to gather
the information necessary to perform the upgrade. A screen
listing will display which components have and have not been
detected. For example:
Looking up update.FreeBSD.org mirrors... 1 mirrors found.
Fetching metadata signature for 9.0-RELEASE from update1.FreeBSD.org... done.
Fetching metadata index... done.
Inspecting system... done.
The following components of FreeBSD seem to be installed:
kernel/smp src/base src/bin src/contrib src/crypto src/etc src/games
src/gnu src/include src/krb5 src/lib src/libexec src/release src/rescue
src/sbin src/secure src/share src/sys src/tools src/ubin src/usbin
world/base world/info world/lib32 world/manpages
The following components of FreeBSD do not seem to be installed:
kernel/generic world/catpages world/dict world/doc world/games
world/proflibs
Does this look reasonable (y/n)? yAt this point, freebsd-update will
attempt to download all files required for the upgrade. In
some cases, the user may be prompted with questions regarding
what to install or how to proceed.
When using a custom kernel, the above step will produce a warning similar to the following:
WARNING: This system is running a "MYKERNEL" kernel, which is not a
kernel configuration distributed as part of FreeBSD 9.0-RELEASE.
This kernel will not be updated: you MUST update the kernel manually
before running "/usr/sbin/freebsd-update install"This warning may be safely ignored at this point. The
updated GENERIC kernel will be used as an
intermediate step in the upgrade process.
Once all the patches have been downloaded to the local
system, they will be applied. This process may take a while,
depending on the speed and workload of the machine.
Configuration files will then be merged. The merging process
requires some user intervention as a file may be merged or an
editor may appear on screen for a manual merge. The results
of every successful merge will be shown to the user as the
process continues. A failed or ignored merge will cause the
process to abort. Users may wish to make a backup of
/etc and manually merge important files,
such as master.passwd or
group at a later time.
The system is not being altered yet as all patching and merging is happening in another directory. Once all patches have been applied successfully, all configuration files have been merged and it seems the process will go smoothly, the changes can be committed to disk by the user using the following command:
#freebsd-update install
The kernel and kernel modules will be patched first. If
the system is running with a custom kernel, use
nextboot(8) to set the kernel for the next boot to the
updated /boot/GENERIC:
#nextboot -k GENERIC
Before rebooting with the GENERIC
kernel, make sure it contains all the drivers required for
the system to boot properly and connect to the network, if
the machine being updated is accessed remotely. In
particular, if the running custom kernel contains built-in
functionality usually provided by kernel modules, make sure
to temporarily load these modules into the
GENERIC kernel using the
/boot/loader.conf facility. It is
recommended to disable non-essential services as well as any
disk and network mounts until the upgrade process is
complete.
The machine should now be restarted with the updated kernel:
#shutdown -r now
Once the system has come back online, restart
freebsd-update using the following command.
Since the state of the process has been saved,
freebsd-update will not start from the
beginning, but will instead move on to the next phase and
remove all old shared libraries and object files.
#freebsd-update install
Depending upon whether any library version numbers were bumped, there may only be two install phases instead of three.
The upgrade is now complete. If this was a major version upgrade, reinstall all ports and packages as described in Section 24.2.3.2, “Upgrading Packages After a Major Version Upgrade”.
Before using freebsd-update, ensure
that a copy of the GENERIC kernel
exists in /boot/GENERIC. If a custom
kernel has only been built once, the kernel in
/boot/kernel.old is the
GENERIC kernel. Simply rename this
directory to /boot/GENERIC.
If a custom kernel has been built more than once or if
it is unknown how many times the custom kernel has been
built, obtain a copy of the GENERIC
kernel that matches the current version of the operating
system. If physical access to the system is available, a
copy of the GENERIC kernel can be
installed from the installation media:
#mount /cdrom#cd /cdrom/usr/freebsd-dist#tar -C/ -xvf kernel.txz boot/kernel/kernel
Alternately, the GENERIC kernel may
be rebuilt and installed from source:
#cd /usr/src#make kernel __MAKE_CONF=/dev/null SRCCONF=/dev/null
For this kernel to be identified as the
GENERIC kernel by
freebsd-update, the
GENERIC configuration file must not
have been modified in any way. It is also suggested that
the kernel is built without any other special
options.
Rebooting into the GENERIC kernel
is not required as freebsd-update only
needs /boot/GENERIC to exist.
Generally, installed applications will continue to work
without problems after minor version upgrades. Major
versions use different Application Binary Interfaces
(ABIs), which will break most
third-party applications. After a major version upgrade,
all installed packages and ports need to be upgraded.
Packages can be upgraded using pkg
upgrade. To upgrade installed ports, use a
utility such as
ports-mgmt/portmaster.
A forced upgrade of all installed packages will replace the packages with fresh versions from the repository even if the version number has not increased. This is required because of the ABI version change when upgrading between major versions of FreeBSD. The forced upgrade can be accomplished by performing:
#pkg-static upgrade -f
A rebuild of all installed applications can be accomplished with this command:
#portmaster -af
This command will display the configuration screens for
each application that has configurable options and wait for
the user to interact with those screens. To prevent this
behavior, and use only the default options, include
-G in the above command.
Once the software upgrades are complete, finish the
upgrade process with a final call to
freebsd-update in order to tie up all the
loose ends in the upgrade process:
#freebsd-update install
If the GENERIC kernel was
temporarily used, this is the time to build and install a
new custom kernel using the instructions in Chapter 8, Configuring the FreeBSD Kernel.
Reboot the machine into the new FreeBSD version. The upgrade process is now complete.
The state of the installed FreeBSD version against a known
good copy can be tested using
freebsd-update IDS. This command evaluates
the current version of system utilities, libraries, and
configuration files and can be used as a built-in Intrusion
Detection System (IDS).
This command is not a replacement for a real
IDS such as
security/snort. As
freebsd-update stores data on disk, the
possibility of tampering is evident. While this possibility
may be reduced using kern.securelevel and
by storing the freebsd-update data on a
read-only file system when not in use, a better solution
would be to compare the system against a secure disk, such
as a DVD or securely stored external
USB disk device. An alternative method
for providing IDS functionality using a
built-in utility is described in Section 14.2.6, “Binary Verification”
To begin the comparison, specify the output file to save the results to:
#freebsd-update IDS >> outfile.ids
The system will now be inspected and a lengthy listing of files, along with the SHA256 hash values for both the known value in the release and the current installation, will be sent to the specified output file.
The entries in the listing are extremely long, but the output format may be easily parsed. For instance, to obtain a list of all files which differ from those in the release, issue the following command:
#cat outfile.ids | awk '{ print $1 }' | more/etc/master.passwd /etc/motd /etc/passwd /etc/pf.conf
This sample output has been truncated as many more files
exist. Some files have natural modifications. For example,
/etc/passwd will be modified if users
have been added to the system. Kernel modules may differ as
freebsd-update may have updated them. To
exclude specific files or directories, add them to the
IDSIgnorePaths option in
/etc/freebsd-update.conf.
All FreeBSD documents are available for download at https://download.freebsd.org/ftp/doc/
Questions that are not answered by the
documentation may be
sent to <freebsd-questions@FreeBSD.org>.
Send questions about this document to <freebsd-doc@FreeBSD.org>.