Now that you have decided that your issue merits a problem report, and that it is a FreeBSD problem, it is time to write the actual problem report. Before we get into the mechanics of the program used to generate and submit PRs, here are some tips and tricks to help make sure that your PR will be most effective.
Do not leave the “Summary”
line empty. The PRs go both onto a mailing
list that goes all over the world (where the
“Summary” is used for the
Subject: line), but also into a
database. Anyone who comes along later and browses the
database by synopsis, and finds a PR with a blank subject
line, tends just to skip over it. Remember that PRs stay
in this database until they are closed by someone; an
anonymous one will usually just disappear in the
noise.
Avoid using a weak “Summary”
line. You should not assume that anyone
reading your PR has any context for your submission, so
the more you provide, the better. For instance, what part
of the system does the problem apply to? Do you only see
the problem while installing, or while running? To
illustrate, instead of
Summary: portupgrade is broken, see
how much more informative this seems:
Summary: port ports-mgmt/portupgrade coredumps
on -current. (In the case of ports, it is
especially helpful to have both the category and portname
in the “Summary” line.)
If you have a patch, say so.
A PR with a patch included is much more likely to be
looked at than one without. Please set the
patch Keyword in Bugzilla.
If you are a maintainer, say so.
If you are maintaining a part of the source code (for
instance, an existing port), you
definitely should set the “Class” of your PR
to maintainer-update. This way any
committer that handles your PR will not have to
check.
Be specific. The more information you supply about what problem you are having, the better your chance of getting a response.
Include the version of FreeBSD you are running (there is a place to put that, see below) and on which architecture. You should include whether you are running from a release (e.g., from a CD-ROM or download), or from a system maintained by Subversion (and, if so, what revision number you are at). If you are tracking the FreeBSD-CURRENT branch, that is the very first thing someone will ask, because fixes (especially for high-profile problems) tend to get committed very quickly, and FreeBSD-CURRENT users are expected to keep up.
Include which global options you have specified in
your make.conf,
src.conf,
and src-env.conf.
Given the infinite number of options, not every
combination may be fully supported.
If the problem can be reproduced easily, include information that will help a developer to reproduce it themselves. If a problem can be demonstrated with specific input then include an example of that input if possible, and include both the actual and the expected output. If this data is large or cannot be made public, then do try to create a minimal file that exhibits the same issue and that can be included within the PR.
If this is a kernel problem, then be prepared to supply the following information. (You do not have to include these by default, which only tends to fill up the database, but you should include excerpts that you think might be relevant):
your kernel configuration (including which hardware devices you have installed)
whether or not you have debugging options
enabled (such as WITNESS), and
if so, whether the problem persists when you
change the sense of that option
the full text of any backtrace, panic or other
console output, or entries in
/var/log/messages, if any
were generated
the output of pciconf -l
and relevant parts of your
dmesg output if your problem
relates to a specific piece of hardware
the fact that you have read
src/UPDATING and that your
problem is not listed there (someone is guaranteed
to ask)
whether or not you can run any other kernel as a fallback (this is to rule out hardware-related issues such as failing disks and overheating CPUs, which can masquerade as kernel problems)
If this is a ports problem, then be prepared to supply the following information. (You do not have to include these by default, which only tends to fill up the database, but you should include excerpts that you think might be relevant):
which ports you have installed
any environment variables that override the
defaults in bsd.port.mk, such
as PORTSDIR
the fact that you have read
ports/UPDATING and that your
problem is not listed there (someone is guaranteed
to ask)
Avoid vague requests for
features. PRs of the form
“someone should really implement something that does
so-and-so” are less likely to get results than
very specific requests. Remember, the source is available
to everyone, so if you want a feature, the best way to
ensure it being included is to get to work! Also consider
the fact that many things like this would make a better
topic for discussion on
freebsd-questions than an entry in the
PR database, as discussed above.
Make sure no one else has already submitted
a similar PR. Although this has already been
mentioned above, it bears repeating here. It only take a
minute or two to use the web-based search engine at https://bugs.freebsd.org/bugzilla/query.cgi.
(Of course, everyone is guilty of forgetting to do this
now and then.)
Report only one issue per Problem Report. Avoid including two or more problems within the same report unless they are related. When submitting patches, avoid adding multiple features or fixing multiple bugs in the same PR unless they are closely related—such PRs often take longer to resolve.
Avoid controversial requests.
If your PR addresses an area that has been controversial
in the past, you should probably be prepared to not only
offer patches, but also justification for why the patches
are “The Right Thing To Do”. As noted above,
a careful search of the mailing lists using the archives
at https://www.FreeBSD.org/search/search.html#mailinglists
is always good preparation.
Be polite. Almost anyone who would potentially work on your PR is a volunteer. No one likes to be told that they have to do something when they are already doing it for some motivation other than monetary gain. This is a good thing to keep in mind at all times on Open Source projects.
Similar considerations apply to use of the web-based PR submission form. Be careful of cut-and-paste operations that might change whitespace or other text formatting.
Finally, if the submission is lengthy, prepare the work offline so that nothing will be lost if there is a problem submitting it.
When attaching a patch, be sure to use
either svn diff or
diff(1) with the -u option
to create a unified diff
and make sure to specify the SVN revision number of the
repository against which you modified files,
so the developers who read your report will
be able to apply them easily. For problems with the kernel or
the base utilities, a patch against FreeBSD-CURRENT (the HEAD
Subversion branch) is preferred since all new code should be
applied and tested there first. After appropriate or
substantial testing has been done, the code will be
merged/migrated to the FreeBSD-STABLE branch.
If you attach a patch inline, instead of as an attachment, note that the most common problem by far is the tendency of some email programs to render tabs as spaces, which will completely ruin anything intended to be part of a Makefile.
Do not send patches as attachments using
Content-Transfer-Encoding:
quoted-printable. These will perform character
escaping and the entire patch will be useless.
Also note that while including small patches in a PR is generally all right—particularly when they fix the problem described in the PR—large patches and especially new code which may require substantial review before committing should be placed on a web or ftp server, and the URL should be included in the PR instead of the patch. Patches in email tend to get mangled, and the larger the patch, the harder it will be for interested parties to unmangle it. Also, posting a patch on the web allows you to modify it without having to resubmit the entire patch in a followup to the original PR. Finally, large patches simply increase the size of the database, since closed PRs are not actually deleted but instead kept and simply marked as complete.
You should also take note that unless you explicitly specify otherwise in your PR or in the patch itself, any patches you submit will be assumed to be licensed under the same terms as the original file you modified.
The email address you use will become public information and may become available to spammers. You should either have spam handling procedures in place, or use a temporary email account. However, please note that if you do not use a valid email account at all, we will not be able to ask you questions about your PR.
When you file a bug, you will find the following fields:
Summary: Fill this out with a short and accurate description of the problem. The synopsis is used as the subject of the problem report email, and is used in problem report listings and summaries; problem reports with obscure synopses tend to get ignored.
Severity: One of
Affects only me,
Affects some people or Affects
many people.
Do not overreact; refrain from labeling your problem
Affects many people unless it really
does. FreeBSD developers will not
necessarily work on your problem faster if you inflate its
importance since there are so many other people who have
done exactly that.
Category: Choose an appropriate category.
The first thing you need to do is to decide what part of the system your problem lies in. Remember, FreeBSD is a complete operating system, which installs both a kernel, the standard libraries, many peripheral drivers, and a large number of utilities (the “base system”). However, there are thousands of additional applications in the Ports Collection. You'll first need to decide if the problem is in the base system or something installed via the Ports Collection.
Here is a description of the major categories:
If a problem is with the kernel, the libraries
(such as standard C library libc),
or a peripheral driver in the base system, in general
you will use the kern category.
(There are a few exceptions; see below). In general
these are things that are described in section 2, 3,
or 4 of the manual pages.
If a problem is with a binary program such as
sh(1) or mount(8), you will first need to
determine whether these programs are in the base
system or were added via the Ports Collection. If you
are unsure, you can do whereis
.
FreeBSD's convention for the Ports Collection is to
install everything underneath
programname/usr/local,
although this can be overridden by a system
administrator. For these, you will use the
ports category (yes, even if the
port's category is www; see below).
If the location is
/bin,
/usr/bin,
/sbin, or
/usr/sbin, it
is part of the base system, and you should use the
bin category. These are all things
that are described in section 1 or 8 of the manual
pages.
If you believe that the error is in the startup
(rc) scripts, or in some kind of
other non-executable configuration file, then the
right category is conf
(configuration). These are things that are described
in section 5 of the manual pages.
If you have found a problem in the documentation
set (articles, books, man pages) or website the
correct choice is docs.
if you are having a problem with something from
a port named
www/,
this nevertheless goes in the
someportnameports category.
There are a few more specialized categories.
If the problem would otherwise be filed in
kern but has to do with the USB
subsystem, the correct choice is
usb.
If the problem would otherwise be filed in
kern but has to do with the
threading libraries, the correct choice is
threads.
If the problem would otherwise be in the base
system, but has to do with our adherence to standards
such as POSIX®, the correct choice is
standards.
If you are convinced that the problem will only
occur under the processor architecture you are using,
select one of the architecture-specific categories:
commonly i386 for Intel-compatible
machines in 32-bit mode; amd64 for
AMD machines running in 64-bit mode (this also
includes Intel-compatible machines running in EMT64
mode); and less commonly arm or
powerpc.
These categories are quite often misused for
“I do not know” problems. Rather than
guessing, please just use
misc.
You have a common PC-based machine, and think
you have encountered a problem specific to a
particular chipset or a particular motherboard:
i386 is the right
category.
You are having a problem with an add-in
peripheral card on a commonly seen bus, or a problem
with a particular type of hard disk drive: in this
case, it probably applies to more than one
architecture, and kern is the
right category.
If you really do not know where the problem lies
(or the explanation does not seem to fit into the ones
above), use the misc category.
Before you do so, you may wish to ask for help on the
FreeBSD general questions mailing list first. You may be advised that one of
the existing categories really is a better
choice.
Environment: This should describe, as accurately as possible, the environment in which the problem has been observed. This includes the operating system version, the version of the specific program or file that contains the problem, and any other relevant items such as system configuration, other installed software that influences the problem, etc.—quite simply everything a developer needs to know to reconstruct the environment in which the problem occurs.
Description:A complete and accurate description of the problem you are experiencing. Try to avoid speculating about the causes of the problem unless you are certain that you are on the right track, as it may mislead a developer into making incorrect assumptions about the problem. It should include the actions you need to take to reproduce the problem. If you know any workaround, include it. It not only helps other people with the same problem work around it, but may also help a developer understand the cause for the problem.
All FreeBSD documents are available for download at https://download.freebsd.org/ftp/doc/
Questions that are not answered by the
documentation may be
sent to <freebsd-questions@FreeBSD.org>.
Send questions about this document to <freebsd-doc@FreeBSD.org>.